Schéma de contrôle du lisseur en céramiqueDescription du programme:Les lisseurs sont également appelés attelles électriques. Le nom anglais est lisseur. Il est communément appelé attelles. Il chauffe
Schéma de contrôle du lisseur en céramique
Description du programme:
Les lisseurs sont également appelés attelles électriques. Le nom anglais est lisseur. Il est communément appelé attelles. Il chauffe l'élément chauffant MCH ou PTC ou le fil chauffant du fer à lisser par courant électrique et conduit la chaleur vers la plaque d'aluminium ou de céramique. Collectez rapidement la température de l'élément chauffant en céramique Réglage de la température à 5 niveaux Voyant lumineux à 5 voies pour indiquer l'état de fonctionnement
Détails du programme:
1. Paramètres de l'interrupteur d'alimentation
Branchez la fiche d'alimentation, appuyez sur le bouton ON / OFF pour allumer (le reste des boutons ne peut pas être activé ou désactivé), le rétroéclairage LCD, etc. sera allumé et la température par défaut à ce moment est de 180 ° C. (Selon les exigences du client)
2. Fonction d'affichage de la température
L'élément chauffant chauffera automatiquement après le démarrage et arrêtera de chauffer jusqu'à la température par défaut de 180 ℃. Pendant ce processus, l'indicateur de progression de la température sur le côté gauche de l'écran LCD affichera le degré de chauffage actuel à mesure que la température augmente.La plage de température est de 80 ° C à 200 ° C. (Selon les exigences du client)
3. Réglage de réglage de la température
Prenons la fonction Celsius comme exemple, appuyez sur HIGH, LOW pour sélectionner la température. Chaque fois que vous appuyez sur HIGH ou LOW, l'affichage de la température sur l'écran LCD augmente ou diminue de 5 ° C (selon les exigences du client). À ce moment, l'écran LCD clignotera. Une fois le réglage de la température arrêté, il clignotera 4 fois pour indiquer la confirmation et il reviendra à l'affichage actuel de la température réelle. La plage de réglage de la température est de 80 ℃ —200 ℃.
4. Veille automatique, arrêt automatique
Étant donné que le client ne l'utilise pas pendant une longue période, le système entrera en état de veille et la température sera constante à environ 100 ° C (selon les exigences du client). S'il n'est pas utilisé pendant une demi-heure, le système s'arrêtera automatiquement. S'il est utilisé dans une demi-heure, le système se réchauffera et se mettra en veille. La température avant.
5. Protection contre les courts-circuits de l'élément chauffant et le circuit ouvert
Si un élément chauffant est court-circuité ou en circuit ouvert, le système ne chauffe pas et Err s'affiche sur l'écran LCD.
6. La puissance à température constante est de 45 W et l'erreur de température est de +/- 3 ℃.
avantage:
⑴ Réduisez la différence de température causée par différents assemblages NTC.
⑵ En raison des différentes méthodes de contrôle de la température, il n'y a pas de dépassement de température à des températures élevées que NTC évite, et le système est sûr.
⑶ Puisque le fer à lisser non-NTC détecte la température du noyau de l'élément chauffant, la précision est grandement améliorée et l'erreur de température est de +/- 3 ℃.
⑷Pas besoin de remplacer aucun composant, il peut fonctionner sous une tension de 110 ~ 220V.
⑸ Travaillant sous une tension de 110V et 220V, la puissance de chauffage est la même.
Fonctionnalités:
1. affichage de la température
2. Réglage de la température
3. Arrêt automatique
4. Affichage de la conversion Celsius et Fahrenheit
5. Veille automatique, réveil automatique
6. Protection contre les courts-circuits de l'élément chauffant et le circuit ouvert
sept. Fonctionnement à large tension (110 ～ 220 V)
Control Scheme of Ceramic Flake Straightener
Scheme description:
Hair straightener is also called electric splint. It is commonly called splint. It is heated by electric current through MCH or PTC or heating wire of the direct hair, which is transmitted to aluminium plate or ceramic plate for heating. Quick Collection of Five Grades Temperature of Ceramic Heating Plate and Adjustment of Five Channel Indicators
Details of the programme:
1. Power Switch Settings
Plug in the power plug, press ON/OFF boot button to boot (the rest of the buttons can not switch on), LCD backlight, etc., at this time the default temperature is 180 C. (Depending on customer's requirements)
2. Temperature Display Function
After starting, the heating experience will be automatically heated until the default temperature is 180 degrees Celsius. During this process, the temperature progress indicator on the left side of LCD will show the current heating degree with the increase of temperature. The temperature range is from 80 C to 200 C. (Depending on customer's requirements)
3. Temperature adjustment settings
Taking Celsius function as an example, LOW can select temperature according to HIGH. Each click on HIGH or LOW, the LCD temperature display will increase or decrease by 5 degrees Celsius (depending on customer requirements). At this time, LCD will flicker, after stopping the temperature adjustment, flicker 4 indicates confirmation, then return to the current actual temperature display. The range of temperature adjustment is from 80 to 200 C.
4. Automatic sleep, automatic shutdown
Because customers do not use the system for a long time after booting, the system will enter a dormant state, the temperature is constant at about 100 C (according to customer requirements), half an hour no longer use, the system will automatically shut down, in half an hour use the system will be heated to restore to the temperature before dormancy.
5. Short Circuit and Open Circuit Protection of Heater
If any heater is short-circuited or open, the system is not heated and Err is displayed on LCD.
6. The constant temperature power is 45W, and the temperature error is +/-3 C.
Advantage:
(1) Reduce the temperature difference caused by different NTC assemblies.
(2) Because of the different temperature control methods, the system is safe without the phenomenon of temperature overshoot avoided by NTC at high temperature.
_Because the non-NTC hair straightener is used to detect the core temperature of the heater, the accuracy is greatly improved, and the temperature error is +/-3 C.
(4) No need to replace any components, it can work normally at 110-220V voltage.
_Working at 110 V and 220 V, the heating power is the same.
Functional introduction:
1. Temperature display
2. Temperature regulation
3. Automatic shutdown
4. Display of Celsius and Fahrenheit Conversion
5. Automatic sleep, Automatic wake-up
6. Short Circuit and Open Circuit Protection of Heater
7. Wide Voltage Operation (110-220 V)
方案描述：
直发器又叫电夹板，英文名为Hair straightener，通俗的叫夹板，是通过电流加热直发器的发热体MCH或PTC或发热丝，传导到铝板或陶瓷板发热。 快速采集陶瓷发热片的温度 5级温度调整 5路指示灯指示工作状况
方案详情：
1．电源开关设置
插上电源插头，按ON/OFF开机键开机（其余按键不能开关机），LCD背光等亮，此时默认温度为180℃。（可根据客户要求而定）
2．温度显示功能
开机后发热体会自动升温，一直加热到默认温度180℃停止。在此过程中，LCD左边的温度进度指示会随温度增加显示当前的加热程度，温度范围：80℃到200℃时。（可根据客户要求而定）
3．温度调节设置
以摄氏功能为例，按HIGH，LOW可以对温度进行选择。每按一下HIGH或LOW，LCD上温度显示会增加或者减少5℃（可根据客户要求而定）。此时LCD会出现闪烁，在停止调温后闪烁4下表示确认，则回到当前实际温度显示。温度调节范围在80℃—200℃。
4．自动休眠，自动关机
由于客户开机后长时间不用，系统会进入休眠状态，温度恒定在100℃左右（可根据客户要求而定），半小时再不使用，系统会自动关机，在半小时内使用系统会加热恢复到休眠前的温度。
5．发热体短路、开路保护
若任何一个发热体短路或开路，系统不加热，LCD上显示Err。
6．恒温功率在45W，温度误差+/-3℃。
优点：
⑴ 减少NTC装配不同而出现的温差。
⑵ 由于控温方式不同，无NTC避免的高温时温度过冲现象，系统安全性好。
⑶由于无NTC直发器是检测发热体芯子温度，所以精度大大提高，温度误差+/-3℃。
⑷不需要更换任何元件，可以在110~220V电压下工常工作。
⑸在110V 和220V 电压下工作，加温的功率一样。
功能介绍：
1．温度显示
2．温度调节
3．自动关机
4．摄氏与华氏转换显示
5．自动休眠，自动唤醒
6．发热体短路、开路保护
7．宽电压工作（110～220V）
Control Scheme of Ceramic Flake Straightener
Scheme description:
Hair straightener is also called electric splint. It is commonly called splint. It is heated by electric current through MCH or PTC or heating wire of the direct hair, which is transmitted to aluminium plate or ceramic plate for heating. Quick Collection of Five Grades Temperature of Ceramic Heating Plate and Adjustment of Five Channel Indicators
Details of the programme:
1. Power Switch Settings
Plug in the power plug, press ON/OFF boot button to boot (the rest of the buttons can not switch on), LCD backlight, etc., at this time the default temperature is 180 C. (Depending on customer's requirements)
2. Temperature Display Function
After starting, the heating experience will be automatically heated until the default temperature is 180 degrees Celsius. During this process, the temperature progress indicator on the left side of LCD will show the current heating degree with the increase of temperature. The temperature range is from 80 C to 200 C. (Depending on customer's requirements)
3. Temperature adjustment settings
Taking Celsius function as an example, LOW can select temperature according to HIGH. Each click on HIGH or LOW, the LCD temperature display will increase or decrease by 5 degrees Celsius (depending on customer requirements). At this time, LCD will flicker, after stopping the temperature adjustment, flicker 4 indicates confirmation, then return to the current actual temperature display. The range of temperature adjustment is from 80 to 200 C.
4. Automatic sleep, automatic shutdown
Because customers do not use the system for a long time after booting, the system will enter a dormant state, the temperature is constant at about 100 C (according to customer requirements), half an hour no longer use, the system will automatically shut down, in half an hour use the system will be heated to restore to the temperature before dormancy.
5. Short Circuit and Open Circuit Protection of Heater
If any heater is short-circuited or open, the system is not heated and Err is displayed on LCD.
6. The constant temperature power is 45W, and the temperature error is +/-3 C.
Advantage:
(1) Reduce the temperature difference caused by different NTC assemblies.
(2) Because of the different temperature control methods, the system is safe without the phenomenon of temperature overshoot avoided by NTC at high temperature.
_Because the non-NTC hair straightener is used to detect the core temperature of the heater, the accuracy is greatly improved, and the temperature error is +/-3 C.
(4) No need to replace any components, it can work normally at 110-220V voltage.
_Working at 110 V and 220 V, the heating power is the same.
Functional introduction:
1. Temperature display
2. Temperature regulation
3. Automatic shutdown
4. Display of Celsius and Fahrenheit Conversion
5. Automatic sleep, Automatic wake-up
6. Short Circuit and Open Circuit Protection of Heater
7. Wide Voltage Operation (110-220 V)
方案描述：
直发器又叫电夹板，英文名为Hair straightener，通俗的叫夹板，是通过电流加热直发器的发热体MCH或PTC或发热丝，传导到铝板或陶瓷板发热。 快速采集陶瓷发热片的温度 5级温度调整 5路指示灯指示工作状况
方案详情：
1．电源开关设置
插上电源插头，按ON/OFF开机键开机（其余按键不能开关机），LCD背光等亮，此时默认温度为180℃。（可根据客户要求而定）
2．温度显示功能
开机后发热体会自动升温，一直加热到默认温度180℃停止。在此过程中，LCD左边的温度进度指示会随温度增加显示当前的加热程度，温度范围：80℃到200℃时。（可根据客户要求而定）
3．温度调节设置
以摄氏功能为例，按HIGH，LOW可以对温度进行选择。每按一下HIGH或LOW，LCD上温度显示会增加或者减少5℃（可根据客户要求而定）。此时LCD会出现闪烁，在停止调温后闪烁4下表示确认，则回到当前实际温度显示。温度调节范围在80℃—200℃。
4．自动休眠，自动关机
由于客户开机后长时间不用，系统会进入休眠状态，温度恒定在100℃左右（可根据客户要求而定），半小时再不使用，系统会自动关机，在半小时内使用系统会加热恢复到休眠前的温度。
5．发热体短路、开路保护
若任何一个发热体短路或开路，系统不加热，LCD上显示Err。
6．恒温功率在45W，温度误差+/-3℃。
优点：
⑴ 减少NTC装配不同而出现的温差。
⑵ 由于控温方式不同，无NTC避免的高温时温度过冲现象，系统安全性好。
⑶由于无NTC直发器是检测发热体芯子温度，所以精度大大提高，温度误差+/-3℃。
⑷不需要更换任何元件，可以在110~220V电压下工常工作。
⑸在110V 和220V 电压下工作，加温的功率一样。
功能介绍：
1．温度显示
2．温度调节
3．自动关机
4．摄氏与华氏转换显示
5．自动休眠，自动唤醒
6．发热体短路、开路保护
7．宽电压工作（110～220V）
Control Scheme of Ceramic Flake Straightener
Scheme description:
Hair straightener is also called electric splint. It is commonly called splint. It is heated by electric current through MCH or PTC or heating wire of the direct hair, which is transmitted to aluminium plate or ceramic plate for heating. Quick Collection of Five Grades Temperature of Ceramic Heating Plate and Adjustment of Five Channel Indicators
Details of the programme:
1. Power Switch Settings
Plug in the power plug, press ON/OFF boot button to boot (the rest of the buttons can not switch on), LCD backlight, etc., at this time the default temperature is 180 C. (Depending on customer's requirements)
2. Temperature Display Function
After starting, the heating experience will be automatically heated until the default temperature is 180 degrees Celsius. During this process, the temperature progress indicator on the left side of LCD will show the current heating degree with the increase of temperature. The temperature range is from 80 C to 200 C. (Depending on customer's requirements)
3. Temperature adjustment settings
Taking Celsius function as an example, LOW can select temperature according to HIGH. Each click on HIGH or LOW, the LCD temperature display will increase or decrease by 5 degrees Celsius (depending on customer requirements). At this time, LCD will flicker, after stopping the temperature adjustment, flicker 4 indicates confirmation, then return to the current actual temperature display. The range of temperature adjustment is from 80 to 200 C.
4. Automatic sleep, automatic shutdown
Because customers do not use the system for a long time after booting, the system will enter a dormant state, the temperature is constant at about 100 C (according to customer requirements), half an hour no longer use, the system will automatically shut down, in half an hour use the system will be heated to restore to the temperature before dormancy.
5. Short Circuit and Open Circuit Protection of Heater
If any heater is short-circuited or open, the system is not heated and Err is displayed on LCD.
6. The constant temperature power is 45W, and the temperature error is +/-3 C.
Advantage:
(1) Reduce the temperature difference caused by different NTC assemblies.
(2) Because of the different temperature control methods, the system is safe without the phenomenon of temperature overshoot avoided by NTC at high temperature.
_Because the non-NTC hair straightener is used to detect the core temperature of the heater, the accuracy is greatly improved, and the temperature error is +/-3 C.
(4) No need to replace any components, it can work normally at 110-220V voltage.
_Working at 110 V and 220 V, the heating power is the same.
Functional introduction:
1. Temperature display
2. Temperature regulation
3. Automatic shutdown
4. Display of Celsius and Fahrenheit Conversion
5. Automatic sleep, Automatic wake-up
6. Short Circuit and Open Circuit Protection of Heater
7. Wide Voltage Operation (110-220 V)
